2024年7月消息,，海灣標準化組織（GSO）此前發布了關于G-Mark認證測試報告的接受期限及產品可追溯性的新要求,。
主要內容概括如下
1.Maximum Acceptance Period for Test Results:
測試報告的最長接受期限：
1.1 Test results shall be generally considered valid only if obtained within a period no longer than 3 years prior to the date of the manufacturer’s application for G-Mark certification to the Notified Body.
1.1 一般情況下只有在制造商向公告機構遞交G-MARK認證申請之日前3年內的測試結果可以被接受,。
1.2 Effective immediately, test results utilized for Gulf Type Examination certification will be considered valid if obtained within a period not exceeding three years from the date of actual test performance. This period is determined from the date when testing activities were completed and issued the test report, as explicitly stated in the laboratory testing report.
1.2 G-mark認證申請的測試報告的實際測試時間不超過三年才被視為有效,。計算此期限以報告中說明的測試完成時間為準,。
2.Traceability of the test reports to the products applied for certification:
測試報告與申請認證產品的可追溯性：
2.1 Test reports shall explicitly reference the manufacturer, brand, and model of the products applied to be certified for G-Mark.
2.1 測試報告應明確標明申請G-Mark認證的產品的制造商,、品牌和型號,。
2.2 The manufacturing location (factory), if indicated in the test report, shall match the information provided in the application for certification.
2.2 如果測試報告中標明了生產地點（工廠）,，則應與認證申請中提供的信息相符。
2.3 The test reports shall include sufficient photo documentation of the tested products to permit the Notified Body to identify the applied product (model), in particular in case of family models or product series.
2.3 測試報告應包含充足的測試產品的照片,，以便公告機構識別申請的產品（型號）,，特別是在涉及系列型號或產品系列的情況下。
3.Product Conformity Declaration (PID):
產品一致性聲明（PID）：
3.1 In cases where the test report does not directly correspond to the product model applied for certification, a Product Identity Declaration (PID) or Declaration of Identity (DOI) shall be provided showing the correlation, similarities and differences between the products applied for certification and the tested products and include the references to all test reports that show the relevant test results.
3.1 在測試報告的產品型號未直接對應申請認證的產品型號的情況下,，應提供產品一致性聲明,，以表明申請認證的產品與測試產品之間的關聯、相似點和差異,，聲明中需要包含所有相關的測試報告信息,。
3.2 The PID/DOI shall be signed by an authorized person on behalf of the manufacturer or his authorized representative (e.g. technical responsible or top management representative) and issued on an official letter showing the name and address of the issuing company.
3.2 PID/DOI應由制造商或其授權代表（例如，技術負責人或高層管理代表）授權人員簽署,，并以顯示發行公司名稱和地址的正式信函形式出具
關注“廣東技術性貿易措施”,，獲取更多服務。
粵公網安備 44010602010620號