編號 | 標題（中文） | 標題（英文） | 年份 | 備注 | 原文鏈接 |
1 | WELMEC介紹 | WELMEC - An Introduction | 2017 | 一般 | |
2 | 指令2014/31/EU和2014/32/EU：普遍適用 非自動衡器,、自動衡器,、多維測量器具 | Directives 2014/31/EU and 2014/32/EU: Common Application Non-automatic Weighing Instruments (NAWI), Automatic Weighing Instruments (AWI), Multi-dimensional Measuring Instruments (MDMI) | 2021 | 非自動衡器指令 | |
2.2 | 銷售終端（POS）設備（非自動衡器）測試指南 | Guide for Testing Point of Sale (POS) Devices (Non-Automatic Weighing Instruments) | 2007 | 非自動衡器指令 | |
2.4 | 非自動衡器和自動衡器非關鍵結構的定義指南 | Guide Defining Non-critical Constructions for NAWI and AWI | 2021 | 非自動衡器指令 | |
2.6 | 自動分檢衡器測試指南 | Guide for the Testing of Automatic Catchweighing Instruments | 2008 | 非自動衡器指令 | |
2.8 | 非自動衡器（指示器）測試結果轉換指南（出于測試自動衡器的目的） | Guide for Conversion of NAWI (Indicators) Test Results for AWI Purposes | 2012 | 非自動衡器指令 | |
2.10 | 非自動衡器和自動衡器模塊評價的技術實施 | Technical Implementation of the Modular Evaluation for Non-automatic Weighing and Automatic Weighing Instruments | 2021 | 非自動衡器指令 | |
4.2 | 在受管制測量中確定適當置信水平的要素 | Elements for Deciding the Appropriate Level of Confidence in Regulated Measurements | 2006 | 一般 | |
5.2 | 市場監管指南（非自動衡器和計量器具指令） | Market Surveillance Guide(NAWI and MID) | 2015 | 市場監管-非自動衡器指令-計量器具指令 | |
5.3 | 衡器和計量器具市場監管的風險評估指南 | Risk Assessment Guide for Market Surveiilance Weigh and Measuring Instruments | 2001 | 市場監管 | |
6.0 | 關于預包裝產品方面的WELMEC文件的介紹 | Introduction to WELMEC Documents on Prepackages | 2010 | 預包裝 | |
6.1 | 指令751/106/EEC和76/211/EEC關于e標志預包裝產品的貼標和質量管控方面的適用范圍-術語定義 | Application of Directives 75/106/EEC and 76/211/EEC Concerning the Marking and Quantity Control of E-Marked Prepackages - Definition of Terms | 2019 | 預包裝 | |
6.3 | 指令76/211/EEC協調實施指南 | Guidance for the Harmonised Implementation of Council Directive 76 211 EEC | 2009 | 預包裝 | |
6.4 | 關于e標志預包裝產品的包裝商和進口商指南 | Guide for Packers and Importers of e-marked Repacked Products | 2015 | 預包裝 | |
6.5 | 關于e標志預包裝產品管控的主管部門指南 | Guidance on Controls by Competent Departments on e marked Prepackages | 2012 | 預包裝 | |
6.6 | 認可程序指南 | Guide for Recognition of Procedures | 2013 | 預包裝 | |
6.7 | 關于預包裝產品市場管控的主管部門指南 | Guidance for Market Control on Prepackages for Competent Departments | 2008 | 預包裝 | |
6.8 | 瀝干物（固形物）重量——瀝干物（固形物）重量、瀝干清洗物重量,、去粘附物重量的檢定指南 | Drained Weight-Guide on the Verification of Drained Weight, Drained Washed Weight and Deglazed Weight | 2020 | 預包裝 | |
6.9 | 預包裝產品——測量不確定度 | Prepackages - Uncertainty of Measurement | 2009 | 預包裝 | |
6.10 | 預包裝產品的管控信息 | Information on Controls on Prepacked Product | 2011 | 預包裝 | |
6.11 | 包裝后數量發生變化的預包裝產品指南 | Guide for Prepackages Whose Quantity Changes After Packing | 2013 | 預包裝 | |
6.12 | 指令75/107/EEC用作量器的瓶子的指南 | Guide on Directive 75 107 EEC Measuring Container Bottles | 2013 | 預包裝 | |
6.13 | 進口e標志預包裝產品合規指南 | Guide on Compliance of Imported e-marked Prepackages | 2017 | 預包裝 | |
6.14 | 預包裝產品重量和容積單位信息指南 | Guidance and Information on Units of Weight or Volume Used on Prepackags | 2018 | 預包裝 | |
7.2 | 軟件指南（計量器具指令2014/32/EU） | Software Guide (Measuring Instruments Directive 2014/32/EU) | 2020 | 軟件 | |
7.3 | 基于WELMEC指南7.2的參考體系結構 | Reference Architectures Based on WELMEC Guide 7.2 | 2020 | 軟件 | |
7.4 | WELMEC指南7.2的示范性應用 | Exemplary Applicaitons of WELMEC Guide 7.2 | 2020 | 軟件 | |
7.5 | 非自動衡器的軟件（非自動衡器指令2014/31/EU） | Software in NAWIs (Non-automatic Weighting Instruments Directive 2014 31 EU) | 2020 | 軟件 | |
8.0 | 指令2014/31/EU和2014/32/EU公告機構——評定和操作概論 | Notified Bodies Directive 2014 31 EC and Directive 2014 32 EC - Generalitied on the Assessment and Operation | 2016 | 計量器具指令-非自動衡器指令 | |
8.1 | MID指令的術語定義及與其他國際計量相關文件術語的關聯 | Termes and Definitions in MID and their Realtion to Terms Defined in Other International Metrologically Relevant Documents | 2020 | 計量器具指令 | |
8.2 | 計量器具指令2014/31/EU 模式H1的申請 | Measuring Instruments Directive 2014/32/EU Application of Module H1 | 2018 | 計量器具指令 | |
8.3 | 指令2014/31/EU或2014/32/EU模式B（EU型式檢驗）的申請 | Application of Module B EU-type Examination Under Directive 2014/32/EU (MID) or Directive 2014 31 EU (NAWID) | 2017 | 計量器具指令-非自動衡器指令 | |
8.4 | 指令2014/31/EU或2014/32/EU模式D（質量保證）的申請 | Application of Module D Quality Assurance Under Directive 2014/32/EU (MID) or DIrective 2014 31 EU (NAWID) | 2017 | 計量器具指令-非自動衡器指令 | |
8.5 | 基于EN ISO/IEC 17065的公告機構評定 | Assessment of Notified Bodies following the EN ISO/IEC 17065 | 2018 | 計量器具指令 | |
8.6 | 非自動衡器指令2014/31/EU 選用EN ISO 9001:2015的模式D制造商質量體系的符合性推定 | Non-Automatic Weighing Instruments Directive 2014/31/EU Presumption of Conformity of the Quality System of Manufacturers with Module D when EN ISO 9001:2015 is applied | 2018 | 計量器具指令-非自動衡器指令 | |
8.7 | 計量器具指令2014/32/EU——指定基于 EN ISO IEC 17020模式F的公告機構評定 | Measuring Instruments Directive 2014/32/EU- Assessment of Notified Bodies Designated for Moodule F based on EN ISO IEC 17020 | 2018 | 計量器具指令 | |
8.8 | 計量器具自愿性模塊評價體系總體和管理方面的指南 | Guide on the General and Administrative Aspects of the Voluntary System of Modular Evaluation of Measuring Instruments | 2017 | 計量器具指令-非自動衡器指令 | |
8.9 | 計量器具指令2014/32/EU的普遍適用——容量量器（CSM） | Measuring Instruments Directive 2014/32/EU, Common Application- Capacity Serving Measures (CSM) | 2020 | 計量器具指令-MI-008-容量量器 | |
8.10 | 計量器具指令2014/32/EU——依據計量器具指令附錄F和F1生成用于統計檢驗的抽樣計劃的指南 | Measuring Instruments Directive (2014/32/EU)- Guide for Generating Sampling Plans for Statistical Verification Accroding to Annex F and F1 of MID 2014/32/EU | 2018 | 計量器具指令-公用事業儀表 | |
8.21 | 指令2014/31/EU和2014/32/EU的普遍適用 | Directives 2014 31 EU and 2014/32/EU Common Application | 2020 | 計量器具指令 | |
10.2 | 與下裝測量系統相關的運輸測定量測量裝置（DTMQ）指南 | Guide to Metrological Devices for Transferring Measured Quantities (DTMQ) Associated to Bottom Loading Measuring Systems | 2019 | 計量器具指令-MI-005-非水液體 | |
10.5 | 燃油加油機標記指南 | Guide for the Marking of Fuel Dispensers | 2020 | 計量器具指令-MI-005-燃油加油機 | |
10.6 | 燃油加油機計量安全性指南（非水液體測量系統） | Guide for Secruing of Fuel Dispensers (Measuring Systems for Liquids Other Than Water) | 2019 | 計量器具指令-MI-005-燃油加油機 | |
10.8 | 計量器具指令附錄VII (MI-005) 和 OIML R 117-1 (R81,、R80,、R139) 的普遍適用指南 | Guide for Common Application of MID Annex VII (MI-005) and OIML R 117-1, (R81, R80, R139) | 2020 | 計量器具指令-MI-005-非水液體 | |
10.10 | 純數字部件的評估指南 | Guide on Evaluating Purely Digital Parts | 2019 | 計量器具指令-MI-005-非水液體 | |
10.11 | 兼容性表——制造商建立MI-005計量器具兼容性表的準則 | Compatibility Sheet - Guideline for Manufacturers to Establish Compatibility Sheets for MI-005 Measuring Instrumetns | 2019 | 計量器具指令-MI-005-非水液體 | |
10.12 | 測試儀表傳感器——評定和測試MI-005儀表傳感器的準則 | Testing Meter Sensors - Guideline for Assessing and Testing MI-005 Meter Sensors | 2019 | 計量器具指令-MI-005-非水液體 | |
10.13 | 減少欺詐性使用和誤用公路油罐車測量系統的指南 | Guide for Minimizing Fraudulent Use and Unintentional Misuse for Measuring Systems on Road Tankers | 2019 | 計量器具指令-MI-005-公路油罐車 | |
10.14 | 燃油加油機預設裝置的評價指南（MI-005）（2020） | Guide for Evaluating a Pre-setting Device for Fuel Dispenses ( MI-005) (2020) | 2020 | 計量器具指令-MI-005-燃油加油機 | |
11.1 | 計量器具指令2014/32/EU——公用事業儀表的普遍適用 | Measuring Instruments Directive 2014/32/EU - Common Application for Utility Meters | 2020 | 計量器具指令-MI-002-燃?xì)獗?/span>, 計量器具指令-MI-003-電能表 | |
11.2 | 計費用的基于時間消耗的測量指南（分時電能表） | Guideline on Time Depending Consumption Measurements for Billing Purpose (Intervel Metering) | 2010 | 計量器具指令-MI-003-電能表 | |
11.3 | 有功電能表,、燃?xì)獗砗娃D(zhuǎn)換裝置的封印指南 | Guide for sealing of Active Electrical Energy Meters and Gas Meters and Conversion Devices | 2020 | 計量器具指令-MI-002-燃?xì)獗?/span>, 計量器具指令-MI-003-電能表 | |
11.4 | 型式評價證書信息指南（由燃?xì)獗淼臉?biāo)記提供或隨附） | Guide for Information in the Type Examination Certificate（to be borne by and to be accompanied (or provided) by the Markings on the Gas Meters ） | 2020 | 計量器具指令-MI-002-燃?xì)獗?/span> | |
11.5 | 公用事業儀表和輔助裝置 | Utility Meters and Ancillary Devices | 2015 | 計量器具指令-MI-002-燃?xì)獗?/span>, 計量器具指令-MI-003-電能表 | |
11.6 | 燃?xì)獗砗腕w積轉換裝置的模塊評價 | Modular Evaluation of Gas Meters and Volume (Conversion Devices) | 2018 | 計量器具指令-MI-002-燃?xì)獗?/span> | |
11.7 | 有功電能表模塊評價 | Modular Evaluation of Active Electrical Energy Meters | 2017 | 計量器具指令-MI-003-電能表 | |
11.8 | 電能表的外部輔助電源 | External Auxiliary Power Supply of Electriacal Energy Meters | 2018 | 計量器具指令-MI-003-電能表 | |
12.1 | 出租車計價器的普遍適用——指令2014/32/EU附件I和IX | Taximeters Common Application- Directive 2014/32/EU, Annexes I & IX | 2020 | 計量器具指令-MI-007-出租車計價器 | |
13.1 | 計量器具指令2014/32/EU公用事業儀表的普遍適用（水表和熱量表） | Measuring Instruments Directive 2014/32/EU Common Application for Utility Meters (Water Meters and Thermal Energy Meters) | 2020 | 計量器具指令-公用事業儀表 | |
13.2 | 帶附加功能和輔助裝置的水表和熱量表 | Water Meters or Thermal Energy Meters Equipped with Additional Funcationalities and Ancillary Devices | 2020 | ||
13.3 | 水表和熱量表封印指南 | Guide for Sealing of Water and Thermal Energy Meters | 2020 |
本信息由廣東省WTO/TBT通報咨詢研究中心摘錄/編輯/整理并翻譯,，譯文僅供參考,，轉載請注明來源,。
粵公網安備 44010602010620號